How To Measure Pants Rise. After measuring, multiply the number by two to determine the full waist circumference. Lay the crotch area flat and straight, and measure from the top of the waistband to the inseam.
Record your measurement and now you know your perfect pant rise. Measure from this intersection up the front, to the top of the waistband; If the pants have pleats, then measure with the pleats closed and not stretched.
This Gives You The Crotch Depth Measurement.
Keep the end of the measuring tape firm against your waist and pull the tape down the along the curve of your hip until you reach the chair. Be sure that the tape measure lays flat against the jeans to get an accurate measurement. Keep your grainline lined up when you make the adjustment (the exception is if you’re only adjusting the back) 4.
Once you’ve got your pant, make sure they’re fully closed then spread them out flat. Stretch the waist flat and align the front and the back of the waistband, measure straight on the bottom and multiply it by 2. Where you took your waist measurement.
For Sewing Pants, Take These Key Measurements:
Lay the pants flat on their sides, so that the legs are folded along the front and back creases. They are also called “lowcut” or “hipster”, and “lowriders”. Repeat on both the front and back to ensure you’re measuring both pant rises.
These Range From 7 To 9 Inches And Are Meant To Be Worn On Your Natural Waist.
How to measure your jeans rise. Measure from this intersection up the front, to the top of the waistband; A few things to remember when adjusting the rise:
Second, Using The Same Leg, You Measure The Inside Leg Seam From The Crotch Point To The Bottom Of Inside Leg Seam.
Measure rise from the top of the waistband down to the crotch seam. Measure the inseam by starting at the center crotch seam, then measuring all the way down one leg to the hem. To measure the rise on women's pants, first locate the intersection of the inseam at the crotch.