How To Remove Sink Drain Cover. Try removing the stopper by hand. Once you have all the tools prepared and ready, here are the steps you should follow to remove the bathroom sink stopper.

Drain Stoppers Home & Kitchen 10CM Rubber Bathtub Sink
Drain Stoppers Home & Kitchen 10CM Rubber Bathtub Sink from mercybarlounge.com

Remove the old sink drain pipe by cutting away the drywall to gain access and then cutting the section of pipework away. Chances are, you won’t even have to remove the stopper. After you've let the mixture sit for 10 minutes, flush your sink once again with boiling water.

Then, Remove The Stopper From The Drain.

While squeezing the clip, push back on the clevis to free it from the pivot rod. All of these may gum up the sink stopper and lead to clogs over time. Spray penetrating lubricant onto the threads between the securing nut and the drain flange.

This Mixture Will Start To Fizz Immediately And Should Be Promptly Poured Down The Drain.

To create the chemical reaction to clean the drain, pour 1/2 cup of baking soda down the drain and 1/2 cup of white vinegar on top. For lift and turns with a twist style base: If you've already cleared out your sink to clean the drain, boil a kettle and pour the boiling water down the drain.

See also  How To Remove Acrylic Paint From Concrete

Flip The Securing Nut Beneath The Sink Counterclockwise With The Pipe Wrench.

How to unclog a drain sink or toilet unclog drain. If the nut is very tight, hold the strainer in place from above with the pliers while you loosen it. Some stoppers can be removed by hand without the need for any special tools or techniques.

You May Also Pour A Small Amount Of This Cleaning Solution Down The Drain To Help Keep The Stopper Clear Of Mineral Deposits, Mold, Mildew And Soap Scum.

The first thing to do is loosen the coupling nut connecting the strainer to the drain pipe, which you can usually do by hand. Take out drain flange step 3: Use a flashlight to illuminate the plumbing beneath the sink and loosen the.

This May Be All You Need To Pull It Out.

Use a new seal on the underside of the drain, replace the washer and tighten the retaining nuts on the underside of the sink and the drain plumbing. Look underneath the sink and locate the pivot rod. Chances are, you won’t even have to remove the stopper.