How To Take Off Security Tag At Home. Once that is done the bottom part of the security tag can be removed safely. Persist in popping the plastic and remove the lining of the silver paper until you see the plate below, which is made of metal.
Move it as far away as possible so the ink doesn't ruin the clothing as much if the sensor cracks. Once that is done the bottom part of the security tag can be removed safely. After snipping the plastic back, you'll find the culprit pointing through, a tiny spike of metal.
I Wanted To Save A Trip Back To The Store, So I Researched A Few Ways To Safely Remove Target Security Tags.
Take any sharp object and scrap to remove this. Wrap the rubber band around this pin several times until it is tight. Saw through the pin that holds the two ends of the security tag together using a thin hacksaw blade.
You Need To Remove The Cap And Balls.
It is on the opposite side of the pin, which is the round part of the tag. Add a second rubber band if the first one doesn’t pop the two pieces apart. Once that is done the bottom part of the security tag can be removed safely.
Make Sure To Keep The Blade As Far Away From The Material As Possible While You Saw.
Press down the square pyramid real hard so that the tag plastic is pierced and pulled up. Another similar alternative is to wrap a plastic bag around the tag and rip it off, but there’s a high margin for error with this method, too. You need direct access to what's beneath it.
With A Magnet, Place It On The Table And Position The Tag Bottom Side Down On The Magnet.
Keep propping the margins of the tag’s plastic and remove the lining of the tag’s silver paper. Move it as far away as possible so the ink doesn't ruin the clothing as much if the sensor cracks. Pulling too hard can bend the mechanism inside and make it even harder to get off.
If You Hold The Tag Above The Magnet (Not On It) And Move It Around And Through The Field, You Will Hear And Feel It Click.
Then, i turned the flathead screwdriver a couple of times until i was able to pop open the security tag. Potential ways to remove a tag: I pulled the clothing to one side of the security tag to create a gap and stuck a large flathead screwdriver inside.